![background image](https://i.printerdoc.net/HP LaserJet 3052 All in One Printer/en/HP LaserJet 3052 All in One Printer_en333.png)
Straight-through output path (HP LaserJet 3390/3392 all-in-one)
To clear a jam in the straight-through output path, perform the following steps:
CAUTION
Do not use sharp objects, such as tweezers or needle-nose pliers, to remove
jams. Damage caused by sharp objects will not be covered by the warranty.
When removing jammed media, pull the jammed media straight away from the all-in-one.
Pulling jammed media out of the all-in-one at an angle can damage the all-in-one.
1.
Open the rear output door.
2.
Rotate the green pressure release levers downward.
ENWW
Clearing jams
315
![background image](https://i.printerdoc.net/HP LaserJet 3052 All in One Printer/en/HP LaserJet 3052 All in One Printer_en334.png)
3.
With both hands, grasp the side of the media that is most visible (this includes the middle), and
carefully pull it free from the all-in-one.
HP LaserJet 3390/3392
NOTE
If you cannot grasp the media with your hands, perform the procedure in
cartridge area
.
4.
Close the rear output door.
HP LaserJet 3390/3392
NOTE
The pressure release levers automatically close when you close the rear output
door.
316
Chapter 13 Troubleshooting
ENWW