Manual configuration
To configure IP manually
1.
On the control , press
Menu
.
2.
Use the
<
or the
>
button to select Network config., and then press .
3.
Use the
<
or the
>
button to select TCP/IP config, and then press .
4.
Use the
<
or the
>
button to select Manual, and then press .
5.
Use the alphanumeric buttons to type the IP address, and then press .
6.
If the IP address is incorrect, use the
<
or the
>
button to select NO, and then press . Repeat
step 5 with the correct IP address, and then repeat step 5 for the subnet mask and default
gateway settings.
158
Chapter 9 Networking
ENWW