Automatic configuration
To perform automatic configuration
1.
On the control , press
Menu
.
2.
Use the
<
or the
>
button to select Network config., and then press .
3.
Use the
<
or the
>
button to select TCP/IP config, and then press .
4.
Use the
<
or the
>
button to select Automatic, and then press .
It may take several minutes before the automatic IP address is ready for use.
NOTE
If you want to disable or enable specific automatic IP modes (such as BOOTP,
DHCP, or AutoIP), these settings can be changed by using the embedded Web server or
HP ToolboxFX only.