To discontinue DHCP configuration
CAUTION
Changes to an IP address on your all-in-one may require updates to all-in-one or
system printing configurations for clients or servers. If you do not want your all-in-one
configured through DHCP, you must reconfigure the all-in-one with a different configuration
method. You can manually modify the TCP/IP parameters through a supported Web browser
using the embedded Web server, the control panel, or HP ToolboxFX. If you change to
BOOTP configuration, the DHCP-configured parameters are released and the TCP/IP protocol
is initialized. If you change to Manual configuration, the DHCP-configured IP address is
released and the user-specified IP parameters are used. Therefore, if you manually provide
the IP address, you should also manually set all of the configuration parameters, such
as subnet mask and default gateway.
ENWW
Using DHCP
167