Requirements for configuring LPD
Before you can use LPD printing, your all-in-one must be properly connected to the network and
have a valid IP address. This information is listed on the all-in-one network configuration page. You
must also have the following:
●
An operating system that supports LPD printing.
●
Superuser (root) or Administrator access to your system.
●
The LAN hardware address (or station address) of the print server. This address is printed on
the all-in-one network configuration page and is of the form:
HARDWARE ADDRESS: xxxxxxxxxxxx
where x is a hexadecimal digit (for example, 0001E6123ABC).