To connect additional devices to the HP LaserJet 3390/3392 all-in-
one
Connect additional devices in the order that is described in the following steps. The output port for
each device is connected to the input port of the next, forming a "chain". If you do not want to
connect a specific device, skip the step that explains it and continue to the next device.
NOTE
Do not connect more than three devices to the telephone line.
1.
Unplug the power cords for all of the devices that you want to connect.
2.
If you have not yet connected your all-in-one to a telephone line, see
Connecting the all-in-one
to a phone line (HP LaserJet 3390/3392 all-in-one)
before proceeding. The all-in-one should
already be connected to a telephone jack.
3.
Remove the plastic insert from the "telephone" port (the port that is marked with the telephone
icon).
ENWW
Connecting additional devices
115
4.
To connect an internal or external modem on a computer, plug one end of a telephone cord into
the all-in-one “telephone” port. Plug the other end of the telephone cord into the modem “line”
port.
NOTE
Some modems have a second “line” port to connect to a dedicated voice line. If
you have two “line” ports, see your modem documentation to make sure that you connect
to the correct “line” port.
5.
To connect a caller-ID box, plug a telephone cord into the previous device’s “telephone” port.
Plug the other end of the telephone cord into the caller-ID box “line” port.
6.
To connect an answering machine, plug a telephone cord into the previous device’s “telephone”
port. Plug the other end of the telephone cord into the answering machine “line” port.
116
Chapter 6 Fax
ENWW
7.
To connect a telephone, plug a telephone cord into the previous device’s “telephone” port. Plug
the other end of the telephone cord into the telephone “line” port.
8.
After you have finished connecting additional devices, plug all of the devices into their power
sources.
9.
Close the left side panel, and then close the print-cartridge door. When closing the left side
panel, make sure that the fax cords are routed through the upper notch in the panel.
ENWW
Connecting additional devices
117
118
Chapter 6 Fax
ENWW
7