To redial manually
Load the document into the automatic document feeder (ADF) input tray or onto the flatbed
On the all-in-one control panel, press
. If the pages that you want to send are in the ADF, then faxing begins
If the all-in-one ADF sensor detects that no document is loaded into the ADF input tray, Send
from glass? 1=Yes 2=No appears on the control-panel display. To send the fax from the
flatbed scanner, press
to select YES, and then press .
After you press , Load page:X Press appears on the control-panel display.
If you have already placed the document on the flatbed scanner, press (or place the
document on the flatbed scanner and then press ).
After scanning the page, Another page? 1=Yes 2=No appears on the control-panel display.
If you have more pages to scan, press
to select YES, and then repeat step 5 for each page of
the fax job.
If you are finished, press
to select NO.
The all-in-one sends the fax to the number that it redialed. If the number is busy or does not answer,
the all-in-one redials the number based on its redial setting. If all redial attempts fail, the all-in-one
updates the fax activity log by adding the error.
Chapter 6 Fax